Information Technology Definition: Modern Technology

A faucet is a device for delivering drinking water from a domestic plumbing system. It can consist of the following components: spout, handle(s), lift up rod, cartridge, aerator, combining chamber, and normal water inlets. If the handle is fired up, the valve opens and controls the stream modification under any normal water or temperature condition. The faucet body is constructed of brass, though die-cast zinc and chrome-plated plastic are also used.

The majority of personal faucets are dual-control or sole cartridge faucets. Some single-control types use a plastic or metal core, which operates vertically. Others use a steel ball, with spring-loaded rubber seals recessed in to the faucet body. The less expensive dual-control faucets contain nylon cartridges with rubber seals. Some faucets have a ceramic-disc cartridge that is a lot more durable.

Faucets must adhere to water conservation laws. In the United States, bathroom basin faucets are actually limited to 2 gal (7.6 L) of normal water per minute, while tub and shower faucets are limited to 2.5 gal (9.5 L).

Faucets run an average of eight minutes per capita each day (pcd), regarding to a report by the American Water Works Association Research Basis completed in 1999 that was based on water use data accumulated from 1,188 residences. In daily pcd use indoor water use was at 69 gal (261 L), with faucet use third highest at 11 gal (41.6 L) pcd. In residences with water-conserving accessories, faucets transferred up to second at 11 gal (41.6 L) pcd. Tap use was tightly related to to household size. The addition of teens and adults increases water use. Faucet use is also negatively related to the number of persons working outside the home and is lower for individuals who have an computerized dishwasher.The creation process for faucets has become highly automated, with computers controlling almost all of the machines. Production and efficiency have thus better over time.

Production and efficiency have upgraded over time. The basic process consists of forming the primary body of the faucet (some-times like the spout if no swivel is necessary), applying a finish, and assembling the many components then, followed by inspection and packaging. The faucet industry in addition has been influenced by environmental regulations, which have required special processes to be developed.