Faucet Body Installation host Tim Carter shares some of his faucet

A faucet is a device for delivering water from a plumbing system. It can consist of the following components: spout, handle(s), lift up rod, cartridge, aerator, mixing chamber, and water inlets. When the handle is fired up, the valve starts and control buttons water move adjustment under any water or temp condition. The faucet body is constructed of brass, though die-cast zinc and chrome-plated plastic are being used also.

Nearly all residential faucets are dual-control or solo cartridge faucets. Some single-control types use a metal or plastic core, which operates vertically. Others use a steel ball, with spring-loaded silicone seals recessed into the faucet body. The less expensive dual-control faucets contain nylon cartridges with plastic seals. Some faucets have a ceramic-disc cartridge that is much more durable.

Faucets must adhere to water conservation regulations. In america, bathroom basin faucets are actually limited by 2 gal (7.6 L) of water per minute, while bathtub and tub faucets are limited to 2.5 gal (9.5 L).

Faucets run typically eight minutes per capita per day (pcd), according to a report by the American Water Works Connection Research Groundwork completed in 1999 that was predicated on drinking water use data accumulated from 1,188 residences. In daily pcd use indoor normal water use was at 69 gal (261 L), with faucet use third highest at 11 gal (41.6 L) pcd. In residences with water-conserving fixtures, faucets shifted up to second at 11 gal (41.6 L) pcd. Tap use was related to home size. The addition of teens and adults increases water use. Sink use is also negatively related to the number of persons working outside the home and is lower for those who have an automatic dishwasher.The manufacturing process for faucets has become highly programmed, with computers controlling the majority of the machines. Output and efficiency have thus advanced over time.

Output and efficiency have improved over time. The essential process consists of forming the key body of the faucet (some-times including the spout if no swivel is necessary), applying a finish, and assembling the many components then, followed by inspection and packaging. The faucet industry in addition has been influenced by environmental regulations, which have required special processes to be developed.