All Products / Kitchen / Kitchen Fixtures / Kitchen Faucets

A faucet is a device for delivering normal water from a domestic plumbing system. It can consist of the following components: spout, handle(s), lift up rod, cartridge, aerator, mixing up chamber, and water inlets. When the handle is turned on, the valve starts and controls water move adjustment under any temperatures or water condition. The faucet person is usually manufactured from brass, though die-cast zinc and chrome-plated plastic are used also.

The majority of residential faucets are single or dual-control cartridge faucets. Some single-control types use a metal or plastic core, which operates vertically. Others use a material ball, with spring-loaded rubber seals recessed in to the faucet body. The less costly dual-control faucets contain nylon cartridges with plastic seals. Some faucets have a ceramic-disc cartridge that is much more durable.

Faucets must adhere to water conservation laws. In the United States, shower basin faucets are now limited to 2 gal (7.6 L) of water per minute, while tub and shower faucets are limited to 2.5 gal (9.5 L).

Faucets run typically eight minutes per capita each day (pcd), matching to a study by the North american Water Works Relationship Research Groundwork completed in 1999 that was predicated on normal water use data collected from 1,188 residences. In daily pcd use indoor normal water use was at 69 gal (261 L), with faucet use third highest at 11 gal (41.6 L) pcd. In residences with water-conserving accessories, faucets relocated up to second at 11 gal (41.6 L) pcd. Tap use was tightly related to to home size. The addition of teens and adults increases water use. Faucet use is also adversely related to the amount of persons working outside the home and is leaner for many who have an automatic dishwasher.The developing process for faucets has become highly automated, with computers managing the majority of the machines. Production and efficiency have thus increased over time.

Efficiency and efficiency have better over the years. The basic process contains forming the key body of the faucet (some-times like the spout if no swivel is needed), applying a finish, and assembling the various components then, followed by packaging and inspection. The faucet industry has also been impacted by environmental regulations, that have required special processes to be developed.